Post your bioexplorer designs here for others to download. Be sure to explain what they do.

This message has been edited. Last edited by: Kurt,

Two-channel EEG C3 and C4 simultaneous training

This message has been edited. Last edited by: Kurt,

2_ch_c3beta_c4smr_kro.bxd (151 Kb, 628 downloads) Two_channel

Two-channel with spectrogram. This is the same as the one above with a black background and two-channel right and left spectrogram on the client display

This message has been edited. Last edited by: Kurt,

2_ch_c3beta_c4smr_spectrogram_kro.bxd (145 Kb, 615 downloads) Two_channel_spectrogram

Tactile Design for Tactile Bear. This runs a constant tone that gets louder and software with the reward band. The tone is constant and is not affected by the inhibits. To get a tactile bear, check out

This is great for using BioExplorer with Brainmaster. Note: if you ahve the new NeuroAmp, it has a built in tactile plug and tactile object, and keep watching this section for screens that use the new tactile object with NeuroAmp.
www.eegshop.com

This message has been edited. Last edited by: Kurt,

tactile_normal_kurt.bxd (110 Kb, 382 downloads) tactile

Tactile with inhibits. This is the same as the display above, the only difference is that the tactile sound for the bear is disabled when the inhibit bands go over threshold, or when the reward band drops below threshold. The volume of the bear sound still gets louder the higher the reward band goes over threshold.

This message has been edited. Last edited by: Kurt,

tactile_with_inhibits_kurt.bxd (110 Kb, 370 downloads) tactile with inhibits

Training www.eegcourses.com Class Demo, this is the design that I use to start each of the Tuesday training courses available free on

This message has been edited. Last edited by: Kurt,

kurt_class.bxd (106 Kb, 326 downloads) Class_design

This is a new two-channel BioExplorer design file from SomaticVision which was created to work with Inner Tube for Bioexplorer.

If you haven't tried Inner Tube yet, you can download the 10 use free trial here: BioExplorer Inner Tube Trial

You can buy Inner Tube for BioExplorer here: Inner Tube on EEGshop.com

This two-channel design works very much like the one-channel design where the reward bands make the ship go forward and the inhibit bands cause the fog to roll in and the tunnel to go dark. If you drop below threshold on the reward bands, the ship will stop, and if you go over threshold on the inhibits, the fog will roll in. Give it a try.

This message has been edited. Last edited by: Kurt,

SomaticVision2Channel.bxd (174 Kb, 209 downloads) 2 channel BXD for Inner Tube

This is another version of the Somaticvision two-channel design for Inner Tube. This version works in a new way. Here the fog in the tunnel is controlled by one channel, and the speed of the ship is controlled by the other. In this way, if you do not meet any of the criteria on channel one, the fog will roll in, or if you don't meet any of the 3 criteria in channel 2, the ship speed will drop. It's another way to think about two channels. Give it a try.

This message has been edited. Last edited by: Kurt,

SomaticVision2ChannelSeparate.bxd (172 Kb, 207 downloads) 2 channel BXD for Inner Tube - Seperate

Here is a set of BioExplorer designs. Run the attached file on your BioExplorer computer and it will extract 6 new designs and the associated flash files. Locate them by going to the designs folder in your BioExplorer software and choosing open, these designs all begin with "New".

This message has been edited. Last edited by: Kurt,

Bioexplorer_Designs.exe (1,598 Kb, 3071 downloads) BioExplorer Designs Sep 11 2007